NSN 5305-01-473-8309
High Torque Screw
Between 0.485 inches and 0.515 inches fastener length, flat countersunk undercut head style, between 0.265 inches and 0.293 inches head diameter, head height: 0.049 inches .
Manufacturer part number 3M1262C3-3-5A for national stock number 5305014738309.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-473-8309.
-
MPN or Model
3M1262C3-3-5A
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.312 inches -
Fastener Length
Between 0.485 inches and 0.515 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.265 inches and 0.293 inches -
Head Height
0.049 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Single Shear Strength
125000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.177 inches and 0.197 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-131-2199 MPN ST3M730-3L6Close Tolerance Screw
- 5305-01-616-5523 MPN TLM1219F3HX16Socket Head Cap Screw
- 1680-01-524-1195 MPN 30-277-5Mat Aircraft Collar
- 5305-00-332-4430 MPN AIC818-08-101CClose Tolerance Screw
- 5305-00-993-8730 MPN 51B221-16Machine Screw
- 5305-01-020-6894 MPN NAS1101E04-9Machine Screw
- 5305-01-050-9001 MPN AIC984-3-9Close Tolerance Screw
- 5305-01-169-6749 MPN AIC4040V3-2303RClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-473-8309 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M1262C3-3-5A | Boeing Company, The |
TX1024C3-3-5A | Arconic Global Fasteners & Rings, |
3M1262C3-3-5A | Saturn Fasteners Inc |
3M1262C3-3-5A | Fastener Innovation Technology, Inc. |
TX1024C3-3-5A | Sps Technologies, Llc |
11853C3-3-5A | Reid Products Inc. |
TX1024C3-3-5A | Hi-shear Corporation |
TX1024C3-3-5A | Sps Technologies, Llc |
TX1024C3-3-5A | Alcoa Fastening Systems |
TX1024C3-3-5A | Lisi Aerospace Canada Corp |
TX1024C3-3-5A | Sps Technologies, Llc |
HP1262C3-3-5 | Heartland Precision Fasteners, Inc. |
TX1024C3-3-5A | Sps Technologies, Llc |
TX1024C3-3-5A | Sps Technologies Inc |
10167833 | Nimikkeistokeskus Ncb Finland |
3M1262C3-3-5A | Twist Tite Mfg, Inc |
3M1262C3-3-5A | B & B Specialties Inc. |