NSN 5305-01-475-1148
High Torque Screw
Between 1.172 inches and 1.219 inches fastener length, flat countersunk head style, 0.8884 inches head diameter, hole diameter: between 0.101 inches and 0.111 inches .
Manufacturer part number GB510FG7D28 for national stock number 5305014751148.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-475-1148.
-
MPN or Model
GB510FG7D28
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 1.172 inches and 1.219 inches -
Head Style
Flat countersunk -
Head Diameter
0.8884 inches -
Hole Diameter
Between 0.101 inches and 0.111 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.437 inches -
Grip Length
Between 0.584 inches and 0.604 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Hole Configuration Style
Round perpendicular -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Screw, close tolerance -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5306-00-390-0521 MPN VEPS132121-9F32Shear Bolt
- 5306-01-033-2663 MPN BACB30NE6H6Close Tolerance Bolt
- 5306-01-052-1185 MPN VAL22034-8F15Shear Bolt
- 5306-01-054-3406 MPN C7521-4-7Shear Bolt
- 5306-01-142-2897 MPN VAL23608-8D30Shoulder Bolt
- 5306-01-160-7560 MPN BACB30NE4-21Close Tolerance Bolt
- 5306-01-182-5628 MPN VCB0008A7-2-205Shoulder Bolt
- 5306-01-205-3403 MPN VAL23033-5D32XShoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-475-1148 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB510FG7D28 | Northrop Grumman Systems Corporation |
GB510CE7-28D | Northrop Grumman Systems Corporation |
VCL0009-7D28 | Valley-todeco, Inc. |
PBBF1202-7-28D | Sps Technologies, Llc |
PBF1475-7D28 | Sps Technologies, Llc |
106706T-7-28D | Sps Technologies, Llc |
124379-7D28 | Sps Technologies, Llc |
SC1779-7-28D | Arconic Global Fasteners & Rings, |
HR204-7-28D | Hi-shear Corporation |