NSN 5305-01-475-2412
High Torque Screw
Between 1.011 inches and 1.041 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.188 inches and 0.189 inches .
Manufacturer part number NAS1973-11T for national stock number 5305014752412.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-475-2412.
-
MPN or Model
NAS1973-11T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
Between 1.011 inches and 1.041 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp e4340 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty ii, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-280-1082 MPN NAS1745-6Conductor Splice
- 5305-00-008-7856 MPN NAS1742C04T6USocket Head Cap Screw
- 5305-00-051-8691 MPN NAS1634-10DMachine Screw
- 5305-00-054-5651 MPN MS51957-17Machine Screw
- 5305-00-071-8889 MPN MS27039C4-14Machine Screw
- 5305-00-111-0721 MPN NAS1102-3-34Machine Screw
- 5305-00-206-3687 MPN NAS517-5-12Machine Screw
- 5305-00-225-7775 MPN MS16996-25Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-475-2412 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1973-11T | National Aerospace Standards |