NSN 5305-01-476-8116
High Torque Screw
0.528 inches fastener length, pan no. 2 head style, between 0.477 inches and 0.492 inches head diameter, head height: between 0.140 inches and 0.150 inches .
Manufacturer part number NAS1217-4-2 for national stock number 5305014768116.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-476-8116.
-
MPN or Model
NAS1217-4-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
0.528 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.140 inches and 0.150 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
End Application
Lgm30 -
Thread Diameter
0.2500 inches -
Grip Length
0.125 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Material Specification
Nas498 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-008-5899 MPN NAS1191-06P10LMachine Screw
- 5305-00-045-7603 MPN MS24625-42Tapping Screw
- 5305-00-059-7411 MPN MS35202-28Machine Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-082-6667 MPN NAS1352C06-12Socket Head Cap Screw
- 5305-00-126-6154 MPN NAS1623E29Machine Screw
- 5305-00-162-4616 MPN NAS1100E06-12Machine Screw
- 5305-00-177-5745 MPN MS3212-52Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-476-8116 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1217-4-2 | National Aerospace Standards |
NAS1217-4-2P | National Aerospace Standards |
NAS1217-4-2P | National Aerospace Standards |
NAS1217-4-2 | National Aerospace Standards |
NAS1217-4-2P | National Aerospace Standards |
NAS1217-4-2 | National Aerospace Standards |
NAS1217-4-2P | National Aerospace Standards |
NAS1217-4-2 | National Aerospace Standards |
NAS1217-4-2P | National Aerospace Standards |