NSN 5305-01-476-9124
High Torque Screw
0.613 inches fastener length, flat countersunk head style, between 0.470 inches and 0.477 inches head diameter, grip diameter: 0.249 inches .
Manufacturer part number 3M1169V4-3A for national stock number 5305014769124.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-476-9124.
-
MPN or Model
3M1169V4-3A
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
095190 - Hardware, NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
0.613 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.470 inches and 0.477 inches -
Grip Diameter
0.249 inches -
Internal Drive Style
Torx -
End Application
F/a-1 (e/f) center fuselage -
Thread Diameter
0.250 inches -
Grip Length
0.188 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Screw, close tolerance -
Material
Titanium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-050-9652 MPN BACB3OLR4U21Close Tolerance Screw
- 5305-01-284-8380 MPN VT10021-5-26Close Tolerance Screw
- 5305-01-365-0404 MPN BACB30LK3-13Close Tolerance Screw
- 5305-01-435-5829 MPN BACB30LU8-54Close Tolerance Screw
- 5305-01-435-8675 MPN BACB30LU9-54Close Tolerance Screw
- 5305-01-494-8910 MPN ST3M652C7-12DClose Tolerance Screw
- 5306-00-139-8056 MPN VAL23602-7DS106Close Tolerance Bolt
- 5306-00-879-5953 MPN 327B511P002Machine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-476-9124 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M1169V4-3A | Boeing Company, The |
TX1026V4-3A | Sps Technologies, Llc |
TX1026V4-3A | Arconic Global Fasteners & Rings, |
TX1026V4-3A | Alcoa Fastening Systems |
11827V4-3A | Reid Products Inc. |
TX1026V4-3A | Sps Technologies Inc |
TX1026V4-3A | Sps Technologies, Llc |
TX1026V4-3A | Hi-shear Corporation |
3M1169V4-3A | Valley-todeco, Inc. |
3M1169V4-3A | Saturn Fasteners Inc |
3M1169V4-3A | Heartland Precision Fasteners, Inc. |
TX1026V4-3A | Huck International, Inc. |
GS1006V4-3A | B & B Specialties Inc. |
3M1169V4-3A | Houston Precision Fasteners I, Lp |
TX1026V4-3A | Sps Technologies, Llc |
3M1169V4-3A | Fastener Innovation Technology, Inc. |
WC1169V4-3A | West Coast Aerospace Inc |
TX1026V4-3A | Sps Technologies, Llc |