NSN 5305-01-477-2728
High Torque Screw
Between 1.410 inches and 1.440 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1581F3R17 for national stock number 5305014772728.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-477-2728.
-
MPN or Model
NAS1581F3R17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 1.410 inches and 1.440 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Aqq-p-416, ty ii, cl 2 military specification 1st treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-018-7513 MPN NAS1219-5-16PMachine Screw
- 5305-00-051-2334 MPN MS51958-108Machine Screw
- 5305-00-052-6680 MPN MS35198-22Machine Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-088-3819 MPN NAS1631-12Machine Screw
- 5305-00-121-2412 MPN NAS1635-04-11Machine Screw
- 5305-00-141-6282 MPN NAS1191E04P18LSocket Head Cap Screw
- 5305-00-151-0011 MPN NASM24693-S302Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-477-2728 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581F3R17 | National Aerospace Standards |