NSN 5305-01-477-3852
Tap Bolt
0.500 inches fastener length, hexagon extended washer head style, between 0.095 inches and 0.121 inches head height, width between flats: between 0.244 inches and 0.250 inches .
Manufacturer part number 88-20260-2 for national stock number 5305014773852.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-01-477-3852.
-
MPN or Model
88-20260-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
0.500 inches -
Head Style
Hexagon extended washer -
Head Height
Between 0.095 inches and 0.121 inches -
Width Between Flats
Between 0.244 inches and 0.250 inches -
Extended Washer Diameter
Between 0.302 inches and 0.328 inches -
Extended Washer Thickness
Between 0.015 inches and 0.028 inches -
End Application
6115-01-462-0290 -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
60000 pounds per square inch -
Material
Steel -
Surface Treatment
Zinc -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-564-1355 MPN 3055469-691Electrical Receptacle Connector
- 4820-01-480-0846 MPN 88-20043Poppet Drain Cock
- 5930-01-378-6921 MPN 88-21126Pressure Switch
- 5925-01-218-6427 MPN 80-7458-01Circuit Breaker
- 5306-01-197-1738 MPN 72-2067-1Threaded End Rod
- 5306-01-519-1696 MPN 98-19567-01Hook Bolt
- 6145-01-422-8602 MPN 88-20444-2Electrical Wire
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-01-477-3852 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
88-20260-2 | Department Of Defense Project |