NSN 5305-01-477-5625
High Torque Screw
Between 1.750 inches and 1.797 inches fastener length, flat countersunk undercut head style, between 0.756 inches and 0.760 inches head diameter, head height: between 0.115 inches and 0.117 inches .
Manufacturer part number HT4020-6-18A for national stock number 5305014775625.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-477-5625.
-
MPN or Model
HT4020-6-18A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.641 inches -
Fastener Length
Between 1.750 inches and 1.797 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.756 inches and 0.760 inches -
Head Height
Between 0.115 inches and 0.117 inches -
Internal Drive Style
High-torque -
End Application
Fighter aircraft-first (f18 e/f) -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Hi-torque bolt, 100 degree flush sealing head close tolerance -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2772 MPN LS15266V3-21Close Tolerance Screw
- 5305-01-038-9556 MPN BACB30LH3-4Close Tolerance Screw
- 5305-01-049-5664 MPN BACB30LH3-6Close Tolerance Screw
- 5306-00-131-7216 MPN VFK100G-06034Shear Bolt
- 5306-00-815-4968 MPN 3M33-3-3Close Tolerance Bolt
- 5306-01-014-5125 MPN VAL23029-5-14Close Tolerance Bolt
- 5306-01-054-3423 MPN C7521L6-20Shear Bolt
- 5306-01-055-0159 MPN C7521-4-5Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-477-5625 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4020-6-18A | Hi-shear Corporation |
HT4020-6-18A | Lisi Aerospace Canada Corp |
ST3M652C6-18A | Boeing Company, The |
11925C6-18A | Reid Products Inc. |
HT4020-6-18A | Sps Technologies Inc |
ST3M652C6-18A | Valley-todeco, Inc. |
HT4020-6-18A | Sps Technologies, Llc |
HT4020-6-18A | Arconic Global Fasteners & Rings, |
ST3M652C6-18A | Heartland Precision Fasteners, Inc. |
HT4020-6-18A | Huck International, Inc. |
HT4020-6-18A | Sps Technologies, Llc |
HT4020-6-18A | Sps Technologies, Llc |
ST3M652C6-18A | Fastener Innovation Technology, Inc. |
HT4020-6-18A | Sps Technologies, Llc |
HT4020-6-18A | Alcoa Global Fasteners, Inc. |
HT4020-6-18A | Sps Technologies Ltd Tj Brooks |
ST3M652C6-18A | Houston Precision Fasteners I, Lp |
WC4020-6-18A | West Coast Aerospace Inc |