NSN 5305-01-483-2457
High Torque Screw
Between 0.699 inches and 0.729 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number NAS1133V7A for national stock number 5305014832457.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-483-2457.
-
MPN or Model
NAS1133V7A
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.699 inches and 0.729 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
Support or pre-provisioning items for which navicp-phil acts as poe -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Screw, maching-pan head, close tolerance, short thread offset cruciform -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4967 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Nas 4006 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5305-00-007-0283 MPN NAS1100E08-26Machine Screw
- 5305-00-008-5910 MPN NAS1189E3T10Socket Head Cap Screw
- 5305-00-008-7855 MPN NAS1100E04-22PMachine Screw
- 5305-00-058-5048 MPN MS24694S112Machine Screw
- 5305-00-151-6201 MPN NAS1096-1-12Machine Screw
- 5305-00-166-0916 MPN NAS1152-10Close Tolerance Screw
- 5305-00-171-2561 MPN NAS1123E12Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-483-2457 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1133V7A | National Aerospace Standards |
NAS1133V7A | National Aerospace Standards |