NSN 5305-01-483-2817
High Torque Screw
Between 1.163 inches and 1.812 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number NAS334C16 for national stock number 5305014832817.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-483-2817.
-
MPN or Model
NAS334C16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.443 inches and 0.510 inches -
Fastener Length
Between 1.163 inches and 1.812 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
1.312 inches -
Width Across Flats
Between 0.157 inches and 0.159 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626 military specification 1st material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-435-3839 MPN NAS1693G10T5S7Electrical Receptacle Connector
- 5305-00-007-0217 MPN NAS1625-2Machine Screw
- 5305-00-052-6919 MPN MS24629-52Tapping Screw
- 5305-00-052-6941 MPN NAS1351C3-36Socket Head Cap Screw
- 5305-00-053-1087 MPN MS35199-59Machine Screw
- 5305-00-053-8965 MPN MS90726-167Hexagon Head Cap Screw
- 5305-00-057-0478 MPN MS24694C113Machine Screw
- 5305-00-057-0483 MPN MS24694C127Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-483-2817 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS334C16 | National Aerospace Standards |