1-321-802-5889

NSN 5305-01-483-3048

High Torque Screw

About this product

Between 0.323 inches and 0.353 inches fastener length, pan head style, between 0.309 inches and 0.331 inches head diameter, head height: between 0.088 inches and 0.102 inches .

Manufacturer part number NAS1142-1 for national stock number 5305014833048.

Datasheet

  • Product description

    Close Tolerance Screw NSN 5305-01-483-3048.

  • MPN or Model

    NAS1142-1

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.251 inches and 0.301 inches
  • Fastener Length
    Between 0.323 inches and 0.353 inches
  • Head Style
    Pan
  • Head Diameter
    Between 0.309 inches and 0.331 inches
  • Head Height
    Between 0.088 inches and 0.102 inches
  • Grip Diameter
    Between 0.1625 inches and 0.1635 inches
  • Internal Drive Style
    Offset cruciform (torque set)
  • End Application
    C-295 acft
  • Thread Diameter
    0.164 inches
  • Grip Length
    Between 0.052 inches and 0.072 inches
  • Thready Qty Per Inch (tpi)
    32
  • Min. Tensile Strength (psi)
    160000 pounds per square inch
  • Hardness Rating
    36.0 rockwell c and 40.0 rockwell c
  • Material
    Steel comp e4340 or steel comp 4140 or steel comp 8740
  • Surface Treatment
    Cadmium and chromate
  • Surface Treatment Specification
    Qq-p-416, type 2, cl 2 federal specification single treatment response
  • Thread Series Designator
    Unjc
More from these suppliers
Close Tolerance Screw

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Mechanic Bill explains High Torque Screw

Pricing and Availability

Get a quote for 5305-01-483-3048 close tolerance screw
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5305014833048

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
NAS1142-1 National Aerospace Standards
Stock Check
Availability for this item was last checked on 09/01/21. The quantities and conditions available at the time were:
  • NE: 1251
  • NS: 25