NSN 5305-01-483-3671
High Torque Screw
Between 0.786 inches and 0.816 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, thread diameter: 0.190 inches.
Manufacturer part number NAS1581C3R7P for national stock number 5305014833671.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-483-3671.
-
MPN or Model
NAS1581C3R7P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093483 - Bolts, Nuts Or Screws, NOI Iron Or -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.786 inches and 0.816 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
End Application
Support of pre-provisioning items for which navicp phil acts as poe -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Bolt, 100 degree flush reduced head -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-7400 MPN NAS1063E4-301Terminal Board Marker Strip
- 5940-01-432-4403 MPN NAS1063A16-507DTerminal Board Marker Strip
- 5940-01-447-2283 MPN NAS1063B-9-14Terminal Board Marker Strip
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 5305-00-007-9896 MPN NAS1102E04-26PMachine Screw
- 5305-00-008-7855 MPN NAS1100E04-22PMachine Screw
- 5305-00-052-3538 MPN NAS608-632-12Socket Head Cap Screw
- 5305-00-052-5917 MPN MS35198-62Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-483-3671 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C3R7P | National Aerospace Standards |