NSN 5305-01-483-5984
High Torque Screw
1.316 inches fastener length, pan head style, between 0.473 inches and 0.492 inches head diameter, head height: between 0.162 inches and 0.175 inches .
Manufacturer part number NAS1134-16 for national stock number 5305014835984.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-483-5984.
-
MPN or Model
NAS1134-16
-
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
1.316 inches -
Head Style
Pan -
Head Diameter
Between 0.473 inches and 0.492 inches -
Head Height
Between 0.162 inches and 0.175 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
V-22 aircraft -
Thread Diameter
0.250 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
28 -
Criticality Code Justification
Agav -
Material
Steel comp 4140 or steel comp 8740 and cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-243-7679 MPN NAS704S2Stud Terminal
- 1560-01-520-7463 MPN NAS3727-15Cord Assembly
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5940-01-451-4892 MPN NAS1063A20-500AZTerminal Board Marker Strip
- 5935-01-646-7802 MPN NAS6704D60Electrical Receptacle Connector
- 5305-00-007-0288 MPN NAS1191E08T7Socket Head Cap Screw
- 5305-00-007-3025 MPN NAS1102E04-6BMachine Screw
- 5305-00-019-9444 MPN MS16208-145Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-483-5984 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1134-16 | National Aerospace Standards |