NSN 5305-01-483-8117
High Torque Screw
0.0312 oversize.
Manufacturer part number NAS1580A4T12Y for national stock number 5305014838117.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-483-8117.
-
MPN or Model
NAS1580A4T12Y
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.138 inches and 1.168 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.506 inches -
Grip Diameter
Between 0.2797 inches and 0.2807 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
Lgm 30g -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or ams 6415 assn standard 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-850-3806 MPN NAS543-5Toggle Switch
- 5305-00-038-2431 MPN NAS514P632-22BMachine Screw
- 5305-00-061-6467 MPN NAS1578V3T1Machine Screw
- 5305-00-081-1474 MPN NAS608C832H24Socket Head Cap Screw
- 5305-00-151-5668 MPN NAS560HK2P5Machine Screw
- 5305-00-174-4601 MPN MS21093-0836Machine Screw
- 5305-00-177-5426 MPN NAS1181-1Close Tolerance Screw
- 5305-00-207-1763 MPN NAS1405-28Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-483-8117 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A4T12Y | National Aerospace Standards |