NSN 5305-01-483-9976
High Torque Screw
Between 1.1785 inches and 1.1985 inches fastener length, flat countersunk head style, between 0.429 inches and 0.479 inches head diameter, grip diameter: between 0.311 inches and 0.312 inches .
Manufacturer part number AIC618-5-11 for national stock number 5305014839976.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-483-9976.
-
MPN or Model
AIC618-5-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
Between 1.1785 inches and 1.1985 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.479 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Point Style
Flat -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.3125 inches -
Grip Length
0.6875 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
6300 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-236-1819 MPN 32-33027-133Shoulder Screw
- 5305-00-450-5959 MPN AIC1023V5-14Close Tolerance Screw
- 5305-00-927-0017 MPN A1C792-4-10Machine Screw
- 5305-01-034-2820 MPN AIC84-4-7Machine Screw
- 5305-01-054-6239 MPN AIC9535-6-25Close Tolerance Screw
- 5305-01-095-5708 MPN AIC870-4-10Socket Head Cap Screw
- 5305-01-099-9502 MPN 51B650-3-8Machine Screw
- 5305-01-158-5369 MPN AIC940-3-4Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-483-9976 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC618-5-11 | Sps Technologies, Llc |
93926-5-11 | Sps Technologies, Llc |
93926-5-11 | Sps Technologies, Llc |
C20645-5-11 | Lockheed Martin Corporation |