NSN 5305-01-484-1260
High Torque Screw
Between 1.603 inches and 1.623 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1580C3R20 for national stock number 5305014841260.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-484-1260.
-
MPN or Model
NAS1580C3R20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 1.603 inches and 1.623 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
B1-bacft -
Thread Diameter
0.190 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
99.0 degrees -
Material
Iron alloy 660 -
Surface Treatment Specification
Qq-o-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5935-01-609-1397 MPN MS3454W28-19SNElectrical Receptacle Connector
- 5940-01-652-2533 MPN NAS1063A4-TB138RDTerminal Board Marker Strip
- 5305-00-008-9117 MPN NAS1190C04T4LSocket Head Cap Screw
- 5305-00-052-7469 MPN MS35198-100Machine Screw
- 5305-00-053-8550 MPN MS24693-S251Machine Screw
- 5305-00-055-2567 MPN NAS1219-08-8Machine Screw
- 5305-00-104-5081 MPN NAS1352-7LE48PSocket Head Cap Screw
- 5305-00-136-7775 MPN NAS1096-2-32Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-484-1260 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580C3R20 | National Aerospace Standards |