NSN 5305-01-484-1279
High Torque Screw
Between 0.660 inches and 0.690 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.2041 inches and 0.2051 inches .
Manufacturer part number NAS1580A3T5DX for national stock number 5305014841279.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-484-1279.
-
MPN or Model
NAS1580A3T5DX
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.660 inches and 0.690 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.2041 inches and 0.2051 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
F-16 a/b/c -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
99.0 degrees -
Material
Iron alloy 660 -
Surface Treatment Specification
Qq-o-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5940-01-510-2082 MPN NAS1063A6Terminal Board Marker Strip
- 5305-00-005-0628 MPN NAS1190-02T3LSocket Head Cap Screw
- 5305-00-058-4012 MPN NASM7839Machine Screw
- 5305-00-059-7411 MPN MS35202-28Machine Screw
- 5305-00-150-3584 MPN NAS583-32Close Tolerance Screw
- 5305-00-197-2400 MPN MS27039C1-37Machine Screw
- 5305-00-211-3436 MPN NAS1635-3LN8Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-484-1279 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A3T5DX | National Aerospace Standards |