NSN 5305-01-484-1292
High Torque Screw
Between 0.598 inches and 0.613 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.2041 inches and 0.2051 inches .
Manufacturer part number NAS1580A3T4DX for national stock number 5305014841292.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-484-1292.
-
MPN or Model
NAS1580A3T4DX
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.598 inches and 0.613 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.2041 inches and 0.2051 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
F-16/b/c/d -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
99.0 degrees -
Material
Iron alloy 660 -
Surface Treatment Specification
Qq-o-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-00-892-2911 MPN NAS1388-3Conductor Splice
- 5940-01-425-6040 MPN NAS1063Terminal Board Marker Strip
- 1680-01-479-7276 MPN NAS354-5-1488Rod
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-017-6157 MPN NAS1221-4-23Machine Screw
- 5305-00-023-0056 MPN NAS560HK3-29Machine Screw
- 5305-00-058-1082 MPN MS51861-34Tapping Screw
- 5305-00-058-5017 MPN MS24677-135Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-484-1292 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A3T4DX | National Aerospace Standards |