1-321-802-5889
Email Us

NSN 5305-01-486-1326

High Torque Screw

About this product

Has a drilled shank.

Manufacturer part number AIC618-4D7 for national stock number 5305014861326.

Datasheet

  • Product description

    Close Tolerance Screw NSN 5305-01-486-1326.

  • MPN or Model

    AIC618-4D7

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    0.403 inches
  • Fastener Length
    1.443 inches
  • Head Style
    Flat countersunk undercut
  • Head Diameter
    0.374 inches
  • Head Height
    0.063 inches
  • Grip Diameter
    Between 0.2485 inches and 0.2495 inches
  • Internal Drive Style
    Offset cruciform (torque set)
  • End Application
    F16 acft
  • Thread Diameter
    0.250 inches
  • Grip Length
    0.438 inches
  • Thready Qty Per Inch (tpi)
    28
  • Min. Tensile Strength (psi)
    3960 pounds per square inch
  • Hardness Rating
    46.0 rockwell c and 50.0 rockwell c
  • Countersink Angle
    Between 99.0 degrees and 101.0 degrees
  • Part Name Assigned By Controlling Agency
    Bolt
  • Material
    Steel comp h11
  • Surface Treatment
    Cadmium
  • Surface Treatment Specification
    Nas672 national specification single treatment response
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Screw

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Mechanic Bill explains High Torque Screw

Pricing and Availability

Get a quote for 5305-01-486-1326 close tolerance screw
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5305014861326

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
AIC618-4D7 Sps Technologies, Llc
93926-4D7 Sps Technologies, Llc
C20645-4D7 Lockheed Martin Corporation
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.