NSN 5305-01-486-6481
High Torque Screw
Between 1.390 inches and 1.420 inches fastener length, flat countersunk head style, 0.578 inches head diameter, grip diameter: between 0.3271 inches and 0.3276 inches .
Manufacturer part number LD111-0045-2515 for national stock number 5305014866481.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-486-6481.
-
MPN or Model
LD111-0045-2515
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.467 inches -
Fastener Length
Between 1.390 inches and 1.420 inches -
Head Style
Flat countersunk -
Head Diameter
0.578 inches -
Grip Diameter
Between 0.3271 inches and 0.3276 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
B1b aircraft -
Thread Diameter
0.3125 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-006-2736 MPN ST3M454-4LBClose Tolerance Screw
- 5305-01-240-7397 MPN 3M925C4-20AClose Tolerance Screw
- 5305-01-435-3462 MPN BACB30LU7-25Close Tolerance Screw
- 5305-01-435-6306 MPN BACB30LU9-19Close Tolerance Screw
- 5306-00-782-9380 MPN BACB30GT8-28Shear Bolt
- 5306-00-974-6595 MPN VAL22034-5-26Close Tolerance Bolt
- 5306-01-027-9512 MPN VEH160271-4M13Close Tolerance Bolt
- 5306-01-142-3544 MPN ST3M507-4D7Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-486-6481 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0045-2515 | Boeing Company, The |
LD111-0045-2515 | Valley-todeco, Inc. |
LD111-0045-2515 | Sps Technologies, Llc |
LD111-0045-2515 | Sps Technologies, Llc |
LD111-0045-2515 | Sonic Industries Inc. |
LD111-0045-2515 | Sps Technologies, Llc |
LD111-0045-2515 | Hi-shear Corporation |
LD111-0045-2515 | Sps Technologies, Llc |