NSN 5305-01-486-9906
High Torque Screw
Between 1.138 inches and 1.168 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number NAS1581K4T12 for national stock number 5305014869906.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-486-9906.
-
MPN or Model
NAS1581K4T12
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 1.138 inches and 1.168 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
C-17a acft -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.02 microinches grip -
Part Name Assigned By Controlling Agency
Screw close tolerance -
Material
Titanium alloy -
Material Specification
Ams4967, comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-082-4892 MPN NAS707-6Stud Terminal
- 5940-01-372-2503 MPN NAS1063B-61-80Terminal Board Marker Strip
- 5940-01-413-3019 MPN NAS1063B75-91Terminal Board Marker Strip
- 5940-01-425-6045 MPN NAS1063A5-440Terminal Board Marker Strip
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5305-00-003-6769 MPN MS24627-64Tapping Screw
- 5305-00-019-9461 MPN NAS1014-23AHexagon Head Cap Screw
- 5305-00-067-9864 MPN MS24667-3Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-486-9906 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581K4T12 | National Aerospace Standards |