NSN 5305-01-488-3735
High Torque Screw
Drive style is: radial-slot recess/ fairchild aerospace, not listed this fiig. Bored hole, threaded end, 0.130 in dia, 0.620 in dp; wire form hold-out spring inserted; 2 lead thread.
Manufacturer part number CA21351-5-10RS for national stock number 5305014883735.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-488-3735.
-
MPN or Model
CA21351-5-10RS
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.567 inches and 0.706 inches -
Fastener Length
1.582 inches -
Head Style
Flat countersunk -
Head Diameter
0.542 inches -
Locking Feature
Detent ring locking feature -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Point Length
0.100 inches -
Point Diameter
Between 0.267 inches and 0.272 inches -
Single Shear Strength
6490 pounds per square inch -
Point Style
Chamfer dog -
End Application
F-22 raptor -
Thread Diameter
0.312 inches -
Grip Length
Between 0.711 inches and 0.850 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
4600 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 100.0 degrees -
Point Chamfer Angle
45.0 degrees -
Part Name Assigned By Controlling Agency
Stud bolt -
Material
Iron alloy 660 -
Material Specification
Ams 5731 national std/spec 1st material response or ams 5737 national std/spec 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams qq-p-35 national std/spec all treatment responses -
Supplementary Features
Stud bolts shall have polyproplene head protective ring installed for shipping, customer to remove ring before installing -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-916-6694 MPN VT1043-3-16Machine Screw
- 5305-01-027-4660 MPN ST3M652C4-7DClose Tolerance Screw
- 5305-01-076-4900 MPN BACS12BW06P8Socket Head Cap Screw
- 5305-01-160-7561 MPN HT4024L5-18Close Tolerance Screw
- 5305-01-193-9713 MPN HT4075V5-10-39Close Tolerance Screw
- 5305-01-231-7420 MPN HT4057-4-12AClose Tolerance Screw
- 5305-01-462-2742 MPN HT4020-6-23AClose Tolerance Screw
- 5305-01-494-8241 MPN HT4020-6-18Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-488-3735 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA21351-5-10RS | Alcoa Global Fasteners, Inc. |