NSN 5305-01-492-1710
High Torque Screw
0.691 inches fastener length, flat countersunk head style, 0.449 inches head diameter, grip diameter: between 0.248 inches and 0.249 inches .
Manufacturer part number NAS1154E6P for national stock number 5305014921710.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-492-1710.
-
MPN or Model
NAS1154E6P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
0.691 inches -
Head Style
Flat countersunk -
Head Diameter
0.449 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty ii, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 5940-01-625-6047 MPN NAS1063C6-1Terminal Board Marker Strip
- 5305-00-007-1589 MPN NAS1102C02-7PMachine Screw
- 5305-00-051-2324 MPN MS51958-92Machine Screw
- 5305-00-052-7407 MPN MS24627-14Tapping Screw
- 5305-00-053-1081 MPN MS35199-44Machine Screw
- 5305-00-055-2566 MPN NAS1219-08-7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-492-1710 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1154E6P | National Aerospace Standards |
10113840 | Nimikkeistokeskus Ncb Finland |