NSN 5305-01-492-2283
High Torque Screw
Between 1.704 inches and 1.734 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1975-20T for national stock number 5305014922283.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-492-2283.
-
MPN or Model
NAS1975-20T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.704 inches and 1.734 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
C-5 aircraft -
Thread Diameter
0.3125 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-006-5610 MPN MS3101E32-8SCElectrical Plug Connector
- 5950-00-035-4417 MPN MS75083-5Radio Frequency Coil
- 5930-00-147-0844 MPN MS16109-30-4-6NRotary Switch
- 5935-00-163-3643 MPN MS27500E18B32PElectrical Plug Connector
- 5935-00-188-6783 MPN MS3106K22-14PElectrical Plug Connector
- 5935-00-201-4584 MPN MS3107B20-27PWElectrical Plug Connector
- 5935-00-263-0213 MPN MS3406R12S3SElectrical Plug Connector
- 5950-00-269-2979 MPN MS90538-17Radio Frequency Coil
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-492-2283 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1975-20T | Military Standards |