NSN 5305-01-493-2707
High Torque Screw
109.5 millimeters fastener length, hexagon head style, 4.0 millimeters head height, width between flats: between 12.73 millimeters and 13.00 millimeters .
Manufacturer part number NA0036-080098 for national stock number 5305014932707.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-493-2707.
-
MPN or Model
NA0036-080098
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Direction
Right-hand -
Thread Length
11.5 millimeters -
Fastener Length
109.5 millimeters -
Head Style
Hexagon -
Head Height
4.0 millimeters -
Width Between Flats
Between 12.73 millimeters and 13.00 millimeters -
Grip Diameter
Between 7.962 millimeters and 7.987 millimeters -
Point Diameter
Between 6.2 millimeters and 6.7 millimeters -
Point Style
Flat -
Thread Diameter
9.975 millimeters -
Grip Length
98.0 millimeters -
Thread Pitch In Millimeters
1.5 -
Material
Steel -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Mj
More from these suppliers
- 5940-00-801-2454 MPN NAS707G2Stud Terminal
- 5305-00-008-5908 MPN NAS1189E04T4LSocket Head Cap Screw
- 5305-00-050-7932 MPN MS24667-43Socket Head Cap Screw
- 5305-00-068-5823 MPN NASM35273 P/N-67Machine Screw
- 5305-00-107-1991 MPN NAS1189-04P6Socket Head Cap Screw
- 5305-00-145-8351 MPN MS24694A3Machine Screw
- 5305-00-165-1832 MPN NAS1581C3H5Close Tolerance Screw
- 5305-00-205-3919 MPN NAS1218-3E6Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-493-2707 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NA0036-080098 | National Aerospace Standards |