NSN 5305-01-493-2708
High Torque Screw
37.12 millimeters fastener length, flat countersunk head style, 10.0 millimeters head diameter, grip diameter: between 4.978 millimeters and 4.990 millimeters .
Manufacturer part number NA0042-050026 for national stock number 5305014932708.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-493-2708.
-
MPN or Model
NA0042-050026
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Direction
Right-hand -
Thread Length
9.0 millimeters -
Fastener Length
37.12 millimeters -
Head Style
Flat countersunk -
Head Diameter
10.0 millimeters -
Grip Diameter
Between 4.978 millimeters and 4.990 millimeters -
Point Diameter
Between 3.5 millimeters and 4.0 millimeters -
Single Shear Strength
600 megapascals -
Point Style
Flat -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
4.973 millimeters -
Grip Length
9.0 millimeters -
Hole Quantity
1 -
Thread Pitch In Millimeters
8.0 -
Countersink Angle
100.0 degrees -
Material
Steel -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Mj
More from these suppliers
- 5305-00-007-9895 MPN NAS1102E04-12PMachine Screw
- 5305-00-097-4593 MPN MS16996-40BSocket Head Cap Screw
- 5305-00-108-0882 MPN NAS514P1032-22PMachine Screw
- 5305-00-141-6269 MPN MS35202-29Machine Screw
- 5305-00-144-1464 MPN NAS1624-8Machine Screw
- 5305-00-182-7475 MPN NAS1352-4LE14PSocket Head Cap Screw
- 5305-00-206-2507 MPN MS35215-56Machine Screw
- 5305-00-225-8507 MPN MS90725-43Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-493-2708 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NA0042-050026 | National Aerospace Standards |