NSN 5305-01-494-4076
High Torque Screw
Between 1.363 inches and 1.393 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.248 inches and 0.249 inches .
Manufacturer part number NAS1154E17D for national stock number 5305014944076.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-494-4076.
-
MPN or Model
NAS1154E17D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 1.363 inches and 1.393 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.946 inches first hole -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-447-9983 MPN NAS1063Terminal Board Marker Strip
- 5305-00-008-5897 MPN NAS1102E5-14Machine Screw
- 5305-00-054-0000 MPN NAS1352C08H8Socket Head Cap Screw
- 5305-00-073-1951 MPN NAS1351-06-6Socket Head Cap Screw
- 5305-00-138-4293 MPN NAS1405-5Machine Screw
- 5305-00-167-3634 MPN AN525-416-11Machine Screw
- 5305-00-206-3681 MPN NAS517-3-17Machine Screw
- 5305-00-273-7463 MPN MS24678-10Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-494-4076 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1154E17D | National Aerospace Standards |