NSN 5305-01-494-8021
High Torque Screw
Item intended for use in fuel sealing applications.
Manufacturer part number ST3M652C5-17D for national stock number 5305014948021.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-494-8021.
-
MPN or Model
ST3M652C5-17D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
Between 1.577 inches and 1.624 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.6287 inches and 0.6335 inches -
Head Height
Between 0.0878 inches and 0.0898 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.3125 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-223-0343 MPN 11907-3-8-1Close Tolerance Screw
- 5305-01-397-1784 MPN 11883-3L18Close Tolerance Screw
- 5305-01-462-2666 MPN 11827D5-16AClose Tolerance Screw
- 5305-01-477-5817 MPN 11825V5-5AClose Tolerance Screw
- 5305-01-513-8793 MPN 11827D5-10AClose Tolerance Screw
- 5306-01-135-6717 MPN 11877-5-23Shoulder Bolt
- 5306-01-299-7602 MPN 11699A05U019Shear Bolt
- 5320-00-303-1059 MPN TL200-05-4Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-494-8021 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M652C5-17D | Boeing Company, The |
11925C5-17D | Reid Products Inc. |
HT4020-5-17 | Hi-shear Corporation |
HT4020-5-17 | Sps Technologies, Llc |
HT4020-5-17 | Sps Technologies Ltd Tj Brooks |
HT4020-5-17 | Lisi Aerospace Canada Corp |