NSN 5305-01-494-8236
High Torque Screw
Between 1.745 inches and 1.822 inches fastener length, flat countersunk undercut head style, between 0.881 inches and 0.888 inches head diameter, head height: between 0.130 inches and 0.133 inches .
Manufacturer part number ST3M652C7-18D for national stock number 5305014948236.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-494-8236.
-
MPN or Model
ST3M652C7-18D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.630 inches and 0.697 inches -
Fastener Length
Between 1.745 inches and 1.822 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.881 inches and 0.888 inches -
Head Height
Between 0.130 inches and 0.133 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-395-3456 MPN HT4024L5-9-1Close Tolerance Screw
- 5305-01-141-7897 MPN HT4020-3-7AYShoulder Screw
- 5305-01-146-3594 MPN HT4025L5-13Close Tolerance Screw
- 5305-01-156-5117 MPN HT4057-3-11AClose Tolerance Screw
- 5305-01-160-7561 MPN ST3M455-5L18-1Close Tolerance Screw
- 5305-01-469-2871 MPN TX1027D4-12AClose Tolerance Screw
- 5320-01-133-9517 MPN HLT50YB-6-3Pin-rivet
- 5320-01-144-3185 MPN HLT252TB-6-8Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-494-8236 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M652C7-18D | Boeing Company, The |
11925C7-18D | Reid Products Inc. |
HT4020-7-18 | Hi-shear Corporation |
HT4020-7-18 | Sps Technologies, Llc |
HT4020-7-18 | Alcoa Global Fasteners, Inc. |
HT4020-7-18 | Sps Technologies Ltd Tj Brooks |
HT4020-7-18 | Lisi Aerospace Canada Corp |
HT4020-7-18 | Sps Technologies Inc |
HT4020-7-18 | Huck Intl Inc |