NSN 5305-01-494-8910
High Torque Screw
Furnished with one oring.
Manufacturer part number HT4020-7-12 for national stock number 5305014948910.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-494-8910.
-
MPN or Model
HT4020-7-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.625 inches and 0.672 inches -
Fastener Length
Between 1.2970 inches and 1.4320 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.7556 inches and 0.7604 inches -
Head Height
Between 0.1147 inches and 0.1167 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.3750 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-526-1038 MPN BACB30LU3-5Close Tolerance Screw
- 5305-01-125-1205 MPN LS15266V4-19Close Tolerance Screw
- 5305-01-170-4571 MPN BACB30LK2-4Close Tolerance Screw
- 5305-01-303-5634 MPN 3M1034C4-10-21Close Tolerance Screw
- 5305-01-417-2490 MPN 3M1169V-3-14AClose Tolerance Screw
- 5305-01-513-9494 MPN ST3M557-3-10Close Tolerance Screw
- 5306-00-238-7390 MPN MS21250-06040Shear Bolt
- 5306-00-343-2737 MPN VAL23001-16D074Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-494-8910 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4020-7-12 | Huck International, Inc. |
HT4020-7-12 | Sps Technologies, Llc |
HT4020-7-12 | Alcoa Global Fasteners, Inc. |
HT4020-7-12 | Hi-shear Corporation |
HT4020-7-12 | Sps Technologies Ltd Tj Brooks |
HT4020-7-12 | Lisi Aerospace Canada Corp |
ST3M652C7-12D | Boeing Company, The |
HT4020-7-12 | Sps Technologies, Llc |
ST3M652C7-12D | Valley-todeco, Inc. |
ST3M652C7-12D | Arconic Global Fasteners & Rings, |
ST3M652C7-12D | Heartland Precision Fasteners, Inc. |
ST3M652C7-12D | Huck International, Inc. |
ST3M652C7-12D | Houston Precision Fasteners I, Lp |
HT4020-7-12 | Sps Technologies, Llc |
ST3M652C7-12D | Fastener Innovation Technology, Inc. |
11925C7-12D | Reid Products Inc. |
ST3M652C7-12D | West Coast Aerospace Inc |
ST3M652C7-12D | Hi-shear Corporation |
ST3M652C7-12D | Sps Technologies, Llc |
ST3M652C7-12D | Lisi Aerospace Canada Corp |
HT4020-7-12 | Sps Technologies Inc |