NSN 5305-01-494-9106
High Torque Screw
Between 1.668 inches and 1.755 inches fastener length, flat countersunk undercut head style, between 0.756 inches and 0.760 inches head diameter, head height: between 0.115 inches and 0.117 inches .
Manufacturer part number HT4020-6-17 for national stock number 5305014949106.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-494-9106.
-
MPN or Model
HT4020-6-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.615 inches and 0.682 inches -
Fastener Length
Between 1.668 inches and 1.755 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.756 inches and 0.760 inches -
Head Height
Between 0.115 inches and 0.117 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
99.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-4220 MPN LS15237C3-11Close Tolerance Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-00-935-7579 MPN HT409A4-19Shoulder Screw
- 5305-01-044-2244 MPN HT4020-4-9Close Tolerance Screw
- 5305-01-104-1467 MPN HT4057-4-7AClose Tolerance Screw
- 5305-01-129-6938 MPN HT4054-4-10AClose Tolerance Screw
- 5305-01-141-7902 MPN HT4020-4-17YShoulder Screw
- 5305-01-143-1751 MPN HT4041-5-11M6YShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-494-9106 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4020-6-17 | Huck International, Inc. |
ST3M652C6-17D | Boeing Company, The |
ST3M652C6-17D | Arconic Global Fasteners & Rings, |
ST3M652C6-17D | Huck International, Inc. |
ST3M652C6-17D | Fastener Innovation Technology, Inc. |
ST3M652C6-17D | West Coast Aerospace Inc |
HT4020-6-17 | Hi-shear Corporation |
HT4020-6-17 | Sps Technologies, Llc |
HT4020-6-17 | Alcoa Global Fasteners, Inc. |
HT4020-6-17 | Sps Technologies Ltd Tj Brooks |
HT4020-6-17 | Lisi Aerospace Canada Corp |
HT4020-6-17 | Sps Technologies Inc |
HT4020-6-17 | Huck Intl Inc |