NSN 5305-01-494-9585
High Torque Screw
Between 0.698 inches and 0.728 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.2197 inches and 0.2207 inches .
Manufacturer part number NAS1790-3-6Y for national stock number 5305014949585.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-494-9585.
-
MPN or Model
NAS1790-3-6Y
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.323 inches and 0.353 inches -
Fastener Length
Between 0.698 inches and 0.728 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.2197 inches and 0.2207 inches -
Point Diameter
0.050 inches -
Point Style
Flat -
Internal Drive Style
High-torque -
End Application
Nimrod2000 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 4340 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-l-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response or ams6415 assn standard 4th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1790 professional/industrial association standard
More from these suppliers
- 5940-01-470-3343 MPN NAS1063A6-510BETerminal Board Marker Strip
- 1680-01-547-3390 MPN NAS76A6-114PBushing Blank
- 5935-01-597-6262 MPN 007A044015-2001Electrical Connector Cover
- 5940-00-681-0402 MPN NAS705S2Stud Terminal
- 5305-00-050-6824 MPN MS24677-76Socket Head Cap Screw
- 5305-00-058-4012 MPN NASM7839Machine Screw
- 5305-00-059-3663 MPN MS51958-67Machine Screw
- 5305-00-069-4233 MPN MS35203-56Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-494-9585 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1790-3-6Y | National Aerospace Standards |
NAS1790-3-6Y | National Aerospace Standards |