NSN 5305-01-495-4930
High Torque Screw
Between 1.454 inches and 1.500 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.310 inches and 0.311 inches .
Manufacturer part number NAS335CA13-5 for national stock number 5305014954930.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-495-4930.
-
MPN or Model
NAS335CA13-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
Between 1.454 inches and 1.500 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.310 inches and 0.311 inches -
Single Shear Strength
7300 pounds per square inch -
Internal Drive Style
Hexagon -
Thread Diameter
0.312 inches -
Grip Length
1.000 inches -
Width Across Flats
Between 0.188 inches and 0.190 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Screw, shear, standard flush head -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-808-3249 MPN NAS715-7AElectrical Receptacle Connector
- 5940-01-354-9984 MPN NAS1063A20-1007Terminal Board Marker Strip
- 1680-01-501-4805 MPN NAS42DD8-80FCAircr Sleeve Spacer
- 5305-00-058-4005 MPN MS24694S113Machine Screw
- 5305-00-099-8027 MPN NAS1351-5H28PSocket Head Cap Screw
- 5305-00-104-7608 MPN NAS1352C3LN40Socket Head Cap Screw
- 5305-00-105-9425 MPN NAS1635-08LE6Socket Head Cap Screw
- 5305-00-150-9517 MPN MILS7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-495-4930 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS335CA13-5 | National Aerospace Standards |