NSN 5305-01-495-5165
High Torque Screw
1.328 inches fastener length, flat countersunk head style, between 0.513 inches and 0.566 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS1996-12DT for national stock number 5305014955165.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-495-5165.
-
MPN or Model
NAS1996-12DT
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
1.328 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.513 inches and 0.566 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
End Application
C5 acft -
Thread Diameter
0.375 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.131 inches first hole -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5625 military specification single material response or mil-s-5000 military specification single material response or mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-718-1721 MPN NAS70753Stud Terminal
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5940-01-381-7134 MPN NAS1063B246-255Terminal Board Marker Strip
- 5305-00-052-5695 MPN NAS1352-06H6Socket Head Cap Screw
- 5305-00-053-1110 MPN MS24621-5Tapping Screw
- 5305-00-068-5398 MPN NAS1351C3H6Socket Head Cap Screw
- 5305-00-079-7977 MPN MS24694S195Machine Screw
- 5305-00-137-6517 MPN NAS1184-8Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-495-5165 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1996-12DT | National Aerospace Standards |