NSN 5305-01-495-7763
High Torque Screw
Between 3.301 inches and 3.331 inches fastener length, flat countersunk head style, 0.449 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1154-48D for national stock number 5305014957763.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-495-7763.
-
MPN or Model
NAS1154-48D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 3.301 inches and 3.331 inches -
Head Style
Flat countersunk -
Head Diameter
0.449 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches all holes -
Internal Drive Style
Offset cruciform (torque set) -
End Application
C5 acft -
Thread Diameter
0.250 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.200 inches all holes -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification single material response or mil-s-8844 military specification single material response or mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 1560-01-623-0437 MPN 520-14945-3Aircraft Stringer
- 5305-00-004-3129 MPN NAS1190E04P15LSocket Head Cap Screw
- 5305-00-007-0287 MPN NAS1131E88PClose Tolerance Screw
- 5305-00-057-2671 MPN NAS1101-3-7Machine Screw
- 5305-00-074-4333 MPN NAS1203-32Close Tolerance Screw
- 5305-00-093-6688 MPN MS21125-0534Close Tolerance Screw
- 5305-00-099-8027 MPN NAS1351-5H28PSocket Head Cap Screw
- 5305-00-104-5081 MPN NAS1352-7LE48PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-495-7763 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1154-48D | National Aerospace Standards |