NSN 5305-01-497-9718
High Torque Screw
0.588 inches fastener length, pan head style, between 0.309 inches and 0.331 inches head diameter, head height: between 0.088 inches and 0.102 inches .
Manufacturer part number NAS1142-5 for national stock number 5305014979718.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-497-9718.
-
MPN or Model
NAS1142-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
0.588 inches -
Head Style
Pan -
Head Diameter
Between 0.309 inches and 0.331 inches -
Head Height
Between 0.088 inches and 0.102 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1142 professional/industrial association standard
More from these suppliers
- 5305-00-016-8193 MPN MS27039-1-42Machine Screw
- 5305-00-021-3740 MPN MS35307-364Hexagon Head Cap Screw
- 5305-00-059-8515 MPN NAS1351-04-4Socket Head Cap Screw
- 5305-00-100-6602 MPN NAS1124-11Close Tolerance Screw
- 5305-00-151-2519 MPN MILS7839Machine Screw
- 5305-00-186-4244 MPN MS24677-164Socket Head Cap Screw
- 5305-00-208-6193 MPN MS24677-38Socket Head Cap Screw
- 5305-00-225-9093 MPN MS90726-38Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-497-9718 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1142-5 | National Aerospace Standards |