NSN 5305-01-497-9723
High Torque Screw
Between 0.885 inches and 0.915 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.219 inches and 0.220 inches .
Manufacturer part number NAS1790-3-9Y for national stock number 5305014979723.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-497-9723.
-
MPN or Model
NAS1790-3-9Y
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
Between 0.885 inches and 0.915 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.219 inches and 0.220 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
0.562 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp e4340 -
Material Specification
Mil-s-5626 military specification 1st material response or ams6415 assn standard 2nd material response or mil-s-5000 military specification 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, tyii, cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1790 professional/industrial association standard
More from these suppliers
- 5940-01-413-3016 MPN NAS1063B38-54Terminal Board Marker Strip
- 5940-01-660-0089 MPN NAS1063Terminal Board Marker Strip
- 5940-01-437-8563 MPN NAS1063A2-107CXTerminal Board Marker Strip
- 5935-00-153-4395 MPN NAS1642R16-24SNElectrical Receptacle Connector
- 5305-00-008-9118 MPN NAS1190E04T8LSocket Head Cap Screw
- 5305-00-052-5938 MPN MS35198-80Machine Screw
- 5305-00-057-0480 MPN MS24694C115Machine Screw
- 5305-00-071-1775 MPN MS90725-122Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-497-9723 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1790-3-9Y | National Aerospace Standards |