NSN 5305-01-498-6689
High Torque Screw
Between 1.459 inches and 1.479 inches fastener length, pan no. 2 head style, between 0.722 inches and 0.740 inches head diameter, head height: between 0.206 inches and 0.220 inches .
Manufacturer part number NAS1578C6T14 for national stock number 5305014986689.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-498-6689.
-
MPN or Model
NAS1578C6T14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 1.459 inches and 1.479 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.722 inches and 0.740 inches -
Head Height
Between 0.206 inches and 0.220 inches -
Grip Diameter
0.374 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
F-22 raptor -
Thread Diameter
0.375 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Part Name Assigned By Controlling Agency
Bolt -
Material
Iron alloy 660 -
Material Specification
Ams 5731 national std/spec single material response or ams 5732 national std/spec single material response or ams 5737 national std/spec single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams qq-p-35 national std/spec single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-2954 MPN NAS1743C06T8USocket Head Cap Screw
- 5305-00-054-2264 MPN MS24678-57CSocket Head Cap Screw
- 5305-00-079-7966 MPN MS24694S215Machine Screw
- 5305-00-225-7773 MPN MS16996-22Socket Head Cap Screw
- 5305-00-269-4200 MPN MS24694S142Machine Screw
- 5305-00-467-0203 MPN NAS1351C01-2Socket Head Cap Screw
- 5305-00-487-6555 MPN MS27039DD1-43Machine Screw
- 5305-00-497-7426 MPN NASM51958Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-498-6689 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578C6T14 | National Aerospace Standards |