NSN 5305-01-500-4318
Button Head Socket Screw
About this product
Between 0.984 inches and 1.016 inches fastener length, flat countersunk head style, between 0.720 inches and 0.781 inches head diameter, internal drive style: hexagon.
Manufacturer part number MS24668-28 for national stock number 5305015004318.
Datasheet
-
Product description
Socket Head Cap Screw NSN 5305-01-500-4318.
-
MPN or Model
MS24668-28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.766 inches -
Fastener Length
Between 0.984 inches and 1.016 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.720 inches and 0.781 inches -
Internal Drive Style
Hexagon -
End Application
2815-01-414-6821 -
Thread Diameter
0.375 inches -
Width Across Flats
Between 0.219 inches and 0.221 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c fastener and 43.0 rockwell c fastener -
Countersink Angle
Between 80.0 degrees and 84.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-008-6905 MPN MS3110P22-55PYElectrical Receptacle Connector
- 5930-00-044-4144 MPN 4AC55Sensitive Switch
- 5935-00-086-2368 MPN MS3110E14-5PElectrical Receptacle Connector
- 5905-00-114-5388 MPN MS35043-47Composition Fixed Resistor
- 5935-00-132-5986 MPN MS27474T22A2PElectrical Receptacle Connector
- 5940-00-143-4774 MPN MS25036-153NLug Terminal
- 5905-00-201-6736 MPN MS35350-14Composition Fixed Resistor
- 5935-00-258-4389 MPN MS3102A20-20PZElectrical Receptacle Connector
Socket Head Cap Screw
An externally threaded fastener whose threaded portion is of one nominal diameter. The head has an internal socket or multiple spline for use with an inserted driver. A locking feature may be incorporated in the design of the head or threads. Excludes items with bevel (conical) heads. See bolt, internal wrenching. Excludes screw, shoulder; and screw, machine.
Pricing and Availability
Get a quote for 5305-01-500-4318 socket head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS24668-28 | Military Standards |
5305015004318 | E.c.a Etablissement |
Stock Check
Availability for this item was last checked on 06/18/24.
The quantities and conditions available at the time were:
- NS: 45
- NE: 4979