NSN 5305-01-500-4638
High Torque Screw
Item is self retaining positive locking.
Manufacturer part number MS3369B310 for national stock number 5305015004638.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-500-4638.
-
MPN or Model
MS3369B310
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.372 inches and 0.376 inches -
Fastener Length
Between 0.997 inches and 1.017 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.095 inches and 0.110 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Grip Length
Between 0.625 inches and 0.641 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 630 -
Material Specification
Ams5643 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5306-01-525-5051 MPN SLB351V6-21Close Tolerance Bolt
- 5305-00-057-1725 MPN NAS1101-08-5Machine Screw
- 5305-00-434-1326 MPN NAS1101-3H16Machine Screw
- 5305-00-990-1379 MPN NAS1190-08P6NSocket Head Cap Screw
- 5305-01-046-5444 MPN ST3M506-5-9Shoulder Screw
- 5305-01-092-0979 MPN NAS1102-08-9BMachine Screw
- 5305-01-131-2208 MPN HT295-6-14Close Tolerance Screw
- 5305-01-141-7193 MPN 3M902C6-10AShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-500-4638 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369B310 | National Aerospace Standards |
SS5112-310 | Space-lok, Inc. |
SS5112-310 | Hi-shear Corporation |
SS5112-310 | Avibank Mfg., Inc. |
SS5112-310 | Lisi Aerospace Canada Corp |
SS5112-310 | Sikorsky Aircraft Corporation |