NSN 5305-01-500-6186
High Torque Screw
0.488 inches fastener length, flat countersunk head style, 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1581C3T2P for national stock number 5305015006186.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-500-6186.
-
MPN or Model
NAS1581C3T2P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
0.488 inches -
Head Style
Flat countersunk -
Head Diameter
0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
C0104, aircraft, harrier av-8b -
Thread Diameter
0.190 inches -
Grip Length
0.125 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or asm 5732 assn standard single material response or ams5737 assn standard single material response or ams 5853 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-659-0276 MPN 520-14082-2Aircraft Structural Component Support
- 5305-00-007-2953 MPN NAS1743C02T12USocket Head Cap Screw
- 5305-00-051-2326 MPN MS51958-95Machine Screw
- 5305-00-052-9971 MPN MS51862-26CTapping Screw
- 5305-00-057-0538 MPN MS51958-56Machine Screw
- 5305-00-068-7046 MPN MS24694A7Machine Screw
- 5305-00-071-2537 MPN MS24694S191Machine Screw
- 5305-00-150-0810 MPN NAS1100C08-46PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-500-6186 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C3T2P | National Aerospace Standards |