NSN 5305-01-501-1260
Bolt Stove
0.250 inches fastener length, flat countersunk head style, between 0.171 inches and 0.199 inches head diameter, internal drive style: cross recess type iii.
Manufacturer part number FF-S-92 for national stock number 5305015011260.
Datasheet
-
Product description
Machine Screw NSN 5305-01-501-1260.
-
MPN or Model
FF-S-92
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
133300 - Machinery/machines NOI -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.250 inches -
Fastener Length
0.250 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.171 inches and 0.199 inches -
Internal Drive Style
Cross recess type iii -
End Application
Fwdfuselage -
Thread Diameter
0.099 inches -
Thready Qty Per Inch (tpi)
56 -
Countersink Angle
82.0 degrees -
Screw Material
Steel comp 301 or steel comp 302 or steel comp 302b or steel comp 303 or steel comp 303se or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 308 or steel comp 309 or steel comp 309s or steel comp 310 -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf -
Nondefinitive Specification/std Data
3 type and 2c style
More from these suppliers
- 5950-00-001-7315 MPN 678-1143-010Reactor
- 5945-00-050-9996 MPN 972-1557-00Electromagnetic Relay
- 5985-00-082-3989 MPN 522-5468-004Antenna Coupler
- 5930-00-086-8742 MPN 269-2272-00Rotary Switch Section
- 5905-00-121-9922 MPN 745-1336-000Composition Fixed Resistor
- 5905-00-164-0134 MPN 721-0568-280Noninductive Wire Wound Fixed Resistor
- 5905-00-219-6857 MPN 724-0626-930Film Fixed Resistor
- 5905-00-233-4515 MPN 705-3163-320Film Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-501-1260 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FF-S-92 | Federal Specifications |
330-1748-250 | Rockwell Collins, Inc. |
330-1748-250 | Allmetal Screw Products Corp. |