NSN 5305-01-501-3318
High Torque Screw
Between 0.638 inches and 0.668 inches fastener length, pan no. 2 head style, between 0.477 inches and 0.492 inches head diameter, head height: between 0.140 inches and 0.150 inches .
Manufacturer part number NAS1578C4T4P for national stock number 5305015013318.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-501-3318.
-
MPN or Model
NAS1578C4T4P
-
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 0.638 inches and 0.668 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.140 inches and 0.150 inches -
End Application
V-22 -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Bolt, flat pan hd, ai -
Material Specification
Ams 5731 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 government standard
More from these suppliers
- 5935-01-108-1815 MPN MS3476L16-26PNElectrical Plug Connector
- 5940-01-372-3356 MPN NAS1063B1-9Terminal Board Marker Strip
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5940-01-660-0092 MPN NAS1063A2-536GTerminal Board Marker Strip
- 5305-00-008-5892 MPN NAS1102E08-30Machine Screw
- 5305-00-008-5892 MPN NAS1102C08-30Machine Screw
- 5305-00-035-5382 MPN NAS1581A3H11TClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-501-3318 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578C4T4P | National Aerospace Standards |