NSN 5305-01-501-4620
High Torque Screw
Between 0.700 inches and 0.730 inches fastener length, pan no. 2 head style, between 0.477 inches and 0.492 inches head diameter, head height: between 0.140 inches and 0.150 inches .
Manufacturer part number NAS1578C4T5P for national stock number 5305015014620.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-501-4620.
-
MPN or Model
NAS1578C4T5P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 0.700 inches and 0.730 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.140 inches and 0.150 inches -
End Application
Mv-22 aircraft -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Part Name Assigned By Controlling Agency
Bolt, flat pan head -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-080-8127 MPN NAS1599Electrical Receptacle Connector
- 1560-01-423-0213 MPN NAS6708D38Aircraft Structural Component Support
- 5935-01-669-1857 MPN 031-2373Electrical Plug Connector
- 5305-00-051-2326 MPN MS51958-95Machine Screw
- 5305-00-059-3665 MPN MS51958-69Machine Screw
- 5305-00-082-1724 MPN MS27039-0820Machine Screw
- 5305-00-143-3251 MPN NAS1352C5LN14Socket Head Cap Screw
- 5305-00-225-7776 MPN MS16996-26Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-501-4620 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578C4T5P | National Aerospace Standards |