NSN 5305-01-501-5664
High Torque Screw
1.799 inches fastener length, flat countersunk head style, 0.578 inches head diameter, grip diameter: between 0.311 inches and 0.312 inches .
Manufacturer part number NAS1580A5R23 for national stock number 5305015015664.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-501-5664.
-
MPN or Model
NAS1580A5R23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
1.799 inches -
Head Style
Flat countersunk -
Head Diameter
0.578 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.3125 inches -
Grip Length
1.438 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-425-7412 MPN NAS1063A4-462Terminal Board Marker Strip
- 5935-01-513-0334 MPN 5A088Electrical Receptacle Connector
- 5305-00-016-6330 MPN NASM24627Tapping Screw
- 5305-00-109-0010 MPN NAS1634-16Machine Screw
- 5305-00-116-1483 MPN NAS1100CE3-10Machine Screw
- 5305-00-150-0810 MPN NAS1100E08-46PMachine Screw
- 5305-00-150-0846 MPN NAS1189C02T14LSocket Head Cap Screw
- 5305-00-151-5666 MPN NAS560HK2P8Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-501-5664 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A5R23 | National Aerospace Standards |
NAS1580A5R23 | National Aerospace Standards |
NAS1580A5R23 | National Aerospace Standards |
NAS1580A5R23 | National Aerospace Standards |
NAS1580A5R23 | National Aerospace Standards |