NSN 5305-01-503-8150
High Torque Screw
Between 0.699 inches and 0.729 inches fastener length, pan head style, between 0.256 inches and 0.270 inches head diameter, head height: between 0.087 inches and 0.097 inches .
Manufacturer part number NAS7701-7 for national stock number 5305015038150.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-503-8150.
-
MPN or Model
NAS7701-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.699 inches and 0.729 inches -
Head Style
Pan -
Head Diameter
Between 0.256 inches and 0.270 inches -
Head Height
Between 0.087 inches and 0.097 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Cross recess type 1 -
End Application
Kc135 gatm a -
Thread Diameter
0.138 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5940-01-394-0109 MPN NAS1063A3-TB504ACTerminal Board Marker Strip
- 4920-01-466-0487 MPN LJ527-13451-900Aircraft Maintenance Alignment Jig
- 5935-01-355-3702 MPN AS50151Electrical Plug Connector
- 5935-01-669-1857 MPN 31Electrical Plug Connector
- 5305-00-007-9894 MPN NAS1102C04-10PMachine Screw
- 5305-00-008-9055 MPN NAS1298-5-18Shoulder Screw
- 5305-00-052-4032 MPN NAS1351-7LE16PSocket Head Cap Screw
- 5305-00-058-4011 MPN MS24694S105Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-503-8150 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7701-7 | National Aerospace Standards |
Stock Check
- NE: 979
- NS: 1