NSN 5305-01-503-8958
High Torque Screw
Item is for use in applications requiring high shear and/or moderate staticor dynamic tension capabilities.
Manufacturer part number HT4027-4-16 for national stock number 5305015038958.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-503-8958.
-
MPN or Model
HT4027-4-16
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.454 inches and 1.484 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.3898 inches and 0.3948 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.2500 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-079-1675 MPN 3MA335CFA6-5Machine Screw
- 5305-01-010-9942 MPN HT8137-3-7Close Tolerance Screw
- 5305-01-046-5444 MPN ST3M506-5-9Shoulder Screw
- 5305-01-056-0170 MPN BACB30LU3D9Close Tolerance Screw
- 5305-01-102-0313 MPN HT4069-5-17AClose Tolerance Screw
- 5305-01-133-1573 MPN HT4041-3-4-5Close Tolerance Screw
- 5305-01-266-5359 MPN HT4024L-3D7Close Tolerance Screw
- 5305-01-337-3297 MPN HT4075D7-21-93Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-503-8958 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4027-4-16 | Sps Technologies, Llc |
ST3M557-4-16 | Boeing Company, The |
11923-4-16 | Reid Products Inc. |
HT4027-4-16 | Arconic Global Fasteners & Rings, |
HT4027-4-16 | Sps Technologies, Llc |