NSN 5305-01-504-0086
High Torque Screw
1.838 inches fastener length, flat countersunk head style, 0.085 inches head diameter, internal drive style: recessed type i.
Manufacturer part number NAS1973-24H for national stock number 5305015040086.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-504-0086.
-
MPN or Model
NAS1973-24H
-
Schedule B
7616.10.6000 (Threaded fasteners of aluminum) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
1.838 inches -
Head Style
Flat countersunk -
Head Diameter
0.085 inches -
Internal Drive Style
Recessed type i -
Thread Diameter
0.1900 inches -
Grip Length
1.500 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Material
Aluminum alloy -
Material Specification
Mil-s-5626 military specification 2nd material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-465-6149 MPN NAS1745-9Conductor Splice
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5305-00-003-9266 MPN NAS514P1032-19Machine Screw
- 5305-00-008-5910 MPN NAS1189C3T10Socket Head Cap Screw
- 5305-00-057-0509 MPN MS51958-12Machine Screw
- 5305-00-145-0957 MPN MS27039-1-43Machine Screw
- 5305-00-197-2388 MPN NAS1101E06-16BMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-504-0086 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1973-24H | National Aerospace Standards |