NSN 5305-01-505-0882
High Torque Screw
Between 18.7 millimeters and 19.3 millimeters fastener length, pan no. 2 head style, between 9.7 millimeters and 10.0 millimeters head diameter, head height: between 2.8 millimeters and 3.0 millimeters .
Manufacturer part number NA0046-050010 for national stock number 5305015050882.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-505-0882.
-
MPN or Model
NA0046-050010
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Direction
Right-hand -
Thread Length
9.0 millimeters -
Fastener Length
Between 18.7 millimeters and 19.3 millimeters -
Head Style
Pan no. 2 -
Head Diameter
Between 9.7 millimeters and 10.0 millimeters -
Head Height
Between 2.8 millimeters and 3.0 millimeters -
Grip Diameter
Between 4.978 millimeters and 4.990 millimeters -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
5.0 millimeters -
Grip Length
Between 9.8 millimeters and 10.2 millimeters -
Thread Pitch In Millimeters
0.8 -
External Thread Tolerance Class
4h6h -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35; type 1 federal specification single treatment response -
Thread Series Designator
Mj
More from these suppliers
- 5940-01-043-8870 MPN NAS1745-13Conductor Splice
- 5940-01-362-7188 MPN NAS1063Terminal Board Marker Strip
- 1680-00-226-0555 MPN NAS303-25-5133Arrestin Cable Assy
- 5305-00-001-4754 MPN NAS1018-34AHexagon Head Cap Screw
- 5305-00-051-2325 MPN NASM51958Machine Screw
- 5305-00-058-9367 MPN MS51977-29Setscrew
- 5305-00-058-9383 MPN MS51977-55Setscrew
- 5305-00-079-1749 MPN MS24694S29Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-505-0882 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NA0046-050010 | National Aerospace Standards |