NSN 5305-01-507-1053
High Torque Screw
0.776 inches fastener length, pan head style, 0.270 inches head diameter, head height: 0.097 inches .
Manufacturer part number NAS1171-7K for national stock number 5305015071053.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-507-1053.
-
MPN or Model
NAS1171-7K
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
0.776 inches -
Head Style
Pan -
Head Diameter
0.270 inches -
Head Height
0.097 inches -
Grip Diameter
0.242 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.138 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 4140 fastener or steel comp 4340 fastener or steel comp e4340 fastener -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-827-6553 MPN NAS1063A9-1Terminal Board Marker Strip
- 5940-01-633-7510 MPN M81824/6-2Conductor Splice
- 5305-00-005-0631 MPN NAS1509-22Close Tolerance Screw
- 5305-00-069-4942 MPN NAS2806-15Close Tolerance Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-143-3235 MPN NAS1352-16LE48PSocket Head Cap Screw
- 5305-00-165-8023 MPN NAS514P632-4PMachine Screw
- 5305-00-182-1356 MPN MILS7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-507-1053 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1171-7K | National Aerospace Standards |